Search Results

Standard

GUIDE FOR QUALIFICATION TESTING OF AIRCRAFT AIR VALVES

1968-11-01

HISTORICAL

ARP986

This document defines the tests to be performed on electrically, pneumatically, and mechanically actuated (regulating, modulating, and shutoff) air valves. The valves may be further defined as those which function in response to externally applied forces or in response to variations in upstream and/or downstream duct air conditions to maintain a calibrated duct air condition (i. e., air flow, air pressure, air temperature, air pressure ratio, etc. ). The requirements of this document should govern for all qualification tests unless different requirements are established by the detail specifications.

Standard

Guide for Qualification Testing of Aircraft Air Valves

2008-11-06

HISTORICAL

ARP986C

This Aerospace Recommended Practice (ARP) defines tests to be performed on hydraulically, electrically, pneumatically, and mechanically actuated air valves. They may be further defined as those valves that function in response to externally applied forces or in response to variations in upstream and/or downstream duct air conditions in order to maintain a calibrated duct air condition (e.g., air flow, air pressure, air temperature, air pressure ratio, or air shutoff).

Standard

AIR CONDITIONING, HELICOPTERS, GENERAL REQUIREMENTS FOR

1954-12-01

HISTORICAL

ARP292

These recommendations are written to cover the general requirements of helicopter air conditioning and are subdivided as follows:

Standard

AIR CONDITIONING, HELICOPTERS, GENERAL REQUIREMENTS FOR

1961-08-15

HISTORICAL

ARP292A

These recommendations are written to cover the general requirements of helicopter air conditioning and are subdivided as follows:

Standard

AIR CONDITIONING, HELICOPTER, GENERAL REQUIREMENTS FOR

1970-10-26

HISTORICAL

ARP292B

These recommendations are written to cover the general requirements of helicopter air conditioning and are sub-divided as follows: (1) Air Conditioning System - Dealing with the general design aspects. (2) Air Conditioning Equipment - Design requirements for satisfactory system function and performance. (3) Air Conditioning System Design Requirements -General information for use of those concerned in meeting requirements contained herein.

Standard

Air Cycle Air Conditioning Systems for Military Air Vehicles

2018-08-23

HISTORICAL

AS4073A

This SAE Aerospace Standard (AS) defines the requirements for air cycle air conditioning systems used on military air vehicles for cooling, heating, ventilation, and moisture and contamination control. General recommendations for an air conditioning system, which may include an air cycle system as a cooling source, are included in MIL-E-18927E (AS) and JSSG-2009. Air cycle air conditioning systems include those components which condition high temperature and high pressure air for delivery to occupied and equipment compartments and to electrical and electronic equipment. This document is applicable to open and closed loop air cycle systems. Definitions are contained in Section 5 of this document.

Standard

Aircraft Humidification

2015-11-09

HISTORICAL

AIR1609A

This SAE Aerospace Information Report (AIR) covers the design parameters for various methods of humidification applicable to aircraft, the physiological aspects of low humidities, the possible benefits of controlling cabin humidity, the penalties associated with humidification, and the problems which must be solved for practical aircraft humidification systems. The design information is applicable to commercial and military aircraft. The physiological aspects cover all aircraft environmental control applications.

Standard

Aircraft Humidification

2021-01-14

CURRENT

AIR1609B

This SAE Aerospace Information Report (AIR) covers the design parameters for various methods of humidification applicable to aircraft, the physiological aspects of low humidities, the possible benefits of controlling cabin humidity, the penalties associated with humidification, and the problems which must be solved for practical aircraft humidification systems. The design information is applicable to commercial and military aircraft. The physiological aspects cover all aircraft environmental control applications.

Standard

Environmental Control for Civil Supersonic Transport

2011-08-10

CURRENT

AIR746C

This document supplements ARP85, to extend its use in the design of ECS for supersonic transports. The ECS provides an environment controlled within specified operational limits of comfort and safety, for humans, animals, and equipment. These limits include pressure, temperature, humidity, conditioned air velocity, ventilation rate, thermal radiation, wall temperature, audible noise, vibration, and composition (ozone, contaminants, etc.) of the environment. The ECS is comprised of equipment, controls, and indicators that supply and distribute conditioned air to the occupied compartments. This system is defined within the ATA 100 specification, Chapter 21. It interfaces with the pneumatic system (Chapter 36 of ATA 100), at the inlet of the air conditioning system shutoff valves.

Standard

Environmental Control for Civil Supersonic Transport

2006-06-28

HISTORICAL

AIR746B

This document supplements ARP85, to extend its use in the design of ECS for supersonic transports. The ECS provides an environment controlled within specified operational limits of comfort and safety, for humans, animals, and equipment. These limits include pressure, temperature, humidity, conditioned air velocity, ventilation rate, thermal radiation, wall temperature, audible noise, vibration, and composition (ozone, contaminants, etc.) of the environment. The ECS is comprised of equipment, controls, and indicators that supply and distribute conditioned air to the occupied compartments. This system is defined within the ATA 100 specification, Chapter 21. It interfaces with the pneumatic system (Chapter 36 of ATA 100), at the inlet of the air conditioning system shutoff valves.

Standard

ENVIRONMENTAL CONTROL FOR CIVIL SUPERSONIC TRANSPORT

1993-06-01

HISTORICAL

AIR746A

This document supplements and in some cases supersedes the recommendations presented in ARP 85D, which refers to subsonic civil transports.

Standard

ENVIRONMENTAL CONTROL* FOR CIVIL SUPERSONIC TRANSPORT

1962-12-01

HISTORICAL

AIR746

Standard

ELECTRONIC EQUIPMENT COOLING DESIGN CONCEPTS FOR HIGH MACH NUMBER AIRCRAFT

1963-01-31

HISTORICAL

AIR728

This publication outlines general design concepts considered the minimum acceptable standards for use in electrical and electronic equipment. The objective is increased reliability of the equipment without penalizing the aircraft performance.

Standard

Electronic Equipment Cooling Design Concepts for High Mach Number Aircraft

1984-03-01

CURRENT

AIR728A

Standard

AIR CONDITIONING OF AIRCRAFT AT HIGH ALTITUDE

1975-04-15

HISTORICAL

AIR795

Standard

AIR CONDITIONING OF SUBSONIC AIRCRAFT AT HIGH ALTITUDE

1984-03-01

CURRENT

AIR795A

This report is limited to the special problems of air quantity, purity, movement, pressure, temperature, and humidity which arise from the requirements of the human body during high altitude flight, together with the associated aircraft design problems.

Standard

Aerospace Pressurization System Design

2004-06-22

HISTORICAL

AIR1168/7

The pressurization system design considerations presented in this AIR deal with human physiological requirements, characteristics of pressurization air sources, methods of controlling cabin pressure, cabin leakage control, leakage calculation methods, and methods of emergency cabin pressure release.

Standard

Fault Isolation in Environmental Control Systems of Commercial Transports

2011-06-20

HISTORICAL

AIR1266A

This SAE Aerospace Information Report (AIR) outlines concepts for the design and use of fault isolation equipment that have general application. The specific focus is on fault isolation of environmental control systems (ECS) in commercial transports. Presented are general fault isolation purposes, design principles, and demonstration of compliance criteria. These are followed by three design examples to aid in understanding the design principles. Future trends in built-in-test-equipment (BITE) design are discussed, some of which represent concepts already being implemented on new equipment.

Standard

FAULT ISOLATION IN ENVIRONMENTAL CONTROL SYSTEMS OF COMMERCIAL TRANSPORTS

1993-06-01

HISTORICAL

AIR1266

This AIR outlines concepts for the design and use of fault isolation equipment that have general application. However, the specific concern applies only to use with Environmental Control Systems in commercial transports. In particular, automatic Built In Test Equipment (BITE) with manual initiation and software programs are covered as systems already in use.

Standard

Fault Isolation in Environmental Control Systems of Commercial Transports

2021-01-12

CURRENT

AIR1266B

This SAE Aerospace Information Report (AIR) outlines concepts for the design and use of fault isolation equipment that have general application. The specific focus is on fault isolation of environmental control systems (ECS) in commercial transports. Presented are general fault isolation purposes, design principles, and demonstration of compliance criteria. These are followed by three design examples to aid in understanding the design principles. Future trends in built-in-test-equipment (BITE) design are discussed, some of which represent concepts already being implemented on new equipment.